Stirrer Accessories
Chemglass Life Sciences Agitator, Turbine, PTFE, 100mm Dia, Fits Shaft Size 10mm
Agitator, Turbine, PTFE, 100mm Dia, Fits Shaft Size 10mm. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Great for use a “foam breaker” at the liquid level in the reactor. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Arrow Engineering Type 316 Stainless Steel VPP Series Propeller 5-1/4"dia. 3 Blade
The Arrow Mixing Products Type 316 Stainless Steel VPP Series 5-/14″dia. 3 blade propeller with 5/16-24 tapped hole. Our stainless propeller selection is engineered for optimal performance, ensuring smooth and consistent mixing for various industries, including pharmaceuticals, food processing, and chemical production. With a carefully crafted design, these propellers maximize power and efficiency, helping you achieve the best results for your mixing needs.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 90° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 90¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Cole-Parmer Industrial Mixer Lift Stand, Winch; 42-82" Height
These new heavy-duty mixer stands are constructed from heavy gauge steel and square steel tubing to accommodate loads of up to 200 lbs. Use with any of our clamp mount mixers. Stands allow you to easily raise or lower your mixer into drums or tanks up to 48" in diameter. Each stand includes a 12" square base plate with four 9/16" mounting holes for permanent attachment to floors or dollies. Use the manual stand for lighter mixers. Manual stand lets you move mixer up or down in 1" increments; clevis pin holds the mixer in place. The winch stand is ideal for heavier mixers. Raise the mixer to any height; winch holds the mixer in place. Choose the air-powered stand for your heaviest mixers. Air motor holds mixer in place at any level.
Sigma Aldrich Fine Chemicals Biosciences PTfE stirrer guides shaft1EA
for use with glass metal and PTfE stirrer shafts.featuresHigh level of chemical resistance Anti-whip and reduced vibration Vacuum (~5mm Hg) and pressure (3-5psi) performance No shedding Self releasing joint ring fits standard ground-glass jointMaximum recommended speeds continuous 500rpm intermittent 800rpm Unique features of the design are a permanently loaded composite PTfE/PEEK seal and a specifically fabricated glass ball-bearing for rigidity and smoothness of operation.Note PEEK has a very high level of chemical resistance with some susceptibility only to strong mineral acids.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 12000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 12000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.